100W Flat Tip Styrofoam Cutting Hot Knife Non-Woven Curtain Fabric Rope Cutter Electric Heating Knife

-- ADVANTAGES: YOBER Electric heating knife kit is used at 5-10 minutes intervals and allow to cool for about 5-10second in between.It could fit kinds of blades to cut most types of synthetic fabrics and nylon ropes,PP ropes,sailing cloth,canvas,webbing belts,net,tube,plastics and many other low-density materials.The cutting edge is so clean and no debris.Like a hot knife through butter reaching better temperature to cut your materials as 5-10seconds.

-- How to use A HOT KNIFE?  Insert blade into the knife holder.You must tighten the screws.Otherwise bad connecting would cause the knife being broken.Plug in the hot knife and press the switch.The light is shining. So please adjust wheels until the light is not shining. It is best position to cut your materials. If you feel the temperature is not good,you could still adjust the wheel to max temperature.  Always clean your blade by brush!

 NOTES: In order to make sure the connection is very good, please kindly try tightening or re-inserting the blade and tightening the screws.

--FAQ

1) Question 1: May we adjust the temperature for 100W?        

    Answer : Yes,then you need to adjust wheel.Press the switch,the light is shining,adjust the wheels until the light is not shining.It is best position to cut.

2) Question 2: Does this hot knife work on 110V US Plug?     

    Answer : Yes,the hot knife has 110V and 220V voltage.The plug has US/UK/SAA/EU plu.When you purchase your order,kindly confirm it.

3) Question 3: Does hot knife fit 7kinds of special-shaped blade?

    Answer: Yes, it can work by special-shaped blade to cut kinds of materials.

4) Question 4: Do I need a carpet or other cutting surface when cutting ropes?

    Answer: No, you need cut mateirals on marble or stainless steel surface or glass surface.